Details
Enviromose Pro Grade Paint Stripper 5 Ltr
Enviromose paint stripper has double the strength with its extra strong gel formula. Ideal for using on metal, wood, masonry, artex etc. It strips all surfaces safely & quickly!
Features:
- Water Based
- Low Odour
- Safer
- Easy to apply gel
- Fast acting
Useful Information
- Wear suitable gloves & eye protection
- Enviromose must be shaken well before use
- For best results use between 10C - 30C
- Do not try to spread the product too ar as this will result in poor penetration
- Allow Envirose to do its work: do not try to remove too quickly
- Never let the surface become too dry during treatment
Preparation: Ensure surfaces to be stripped are dry. Protection should be provided for floor coatings, or any surface that may be damaged by Envirmose (perspex, plastics, rubber etc.
How to apply
- Cover top with a cloth during opening to avoid splashes.
- Apply generous, even coat & do not brush out. Layer Enviromose onto surface to be stripped with suitable brush..
- Leave for 1 hour & apply a second generous coat. For less than 5 layers of paint or varnish, a second coat may not be necessary.
- After product has penetrated to be substrate (up to 24 hours), scrape off, leaving surface as clean as possible.
- Rub down using a scrubbing brush or stainless stell pad & water.
- Rinse with clean cold water & allow to dry.
Additional Information
| Code | TEC3814 |
|---|