Beeline Fungicidal Wash (1 Litres)

Beeline Fungicidal Wash is specially formulated to prevent and readicate the growth of fungi mould, algae and lichen from most common masonry surfaces. It is suitable for use on plaster, for use on plaster, brick-work, cement, stone and concrete. It can also be used on most common types of painted masonrywall surfaces although a small test area application is recommended to verify compatibility.

Concentrated 1 Litre. Dilutes with water to make 5 Litres. Kills organic growth on most substrates and prevents the reappearance of unsightly growths of mould, algae, fungi, moss etc. on ceilings and interior or exterior walls. Most effective for use prior to painting. Diluted to 5 Litres will be sufficient to treat an approximate area of 15 - 35 m. sq. depending on the strength of the growth.

Directions for use

1. Prepare a surface by removing all established fungal growths & any other unwanted vegetation using a scraper if stiff brush to reveal bare masonry.
2. On exterior surfaces, apply during dry weather & scrub solution into the effected area. Leave to soak in for up to 24 hours before applying any subsequent coatings.
3. Interior surfaces should also recieve a similar preperation to remove encrusted growths from tiles & paintwork. Again leave for 24 hours before re-decorating & if necessary wash off any exess residues with water.
4. Paths & patios may be treated using a watering can be fitted with a disperser head to ensure complete & consistant coverage.

Note: Areas affected by extensive, well-established mould growth may be treated with a stronger dilution of 1 part fungicidal wash to 2 parts water following the removal of all unwanted vegetation. Allow the solution to stand for about 5 minutes then vigorously scrub it into the surface with a stiff yard brush to ensure complete penetration.